Fmdvr56a Forge Motorsport Fit R56/57 Blow Off Valve N14 Engines

Fmdvr56a Forge Motorsport Fit R56/57 Blow Off Valve N14 Engines

Fmdvr56a Forge Motorsport Fit R56/57 Blow Off Valve N14 Engines

   Fmdvr56a Forge Motorsport Fit R56/57 Blow Off Valve N14 Engines

FMDVR56A FIT FORGE MOTORSPORT MINI R56/57 BLOW OFF VALVE N14 ENGINES COOPER S 2007-10, JCW COOPER S 2007-12. This Blow Off valve is for the Peugeot / BMW Mini 1.6 Turbo engines, as found in the Peugeot 207/307/308 GT Turbo and BMW Mini Cooper S Turbo fitted with the N14 engines. Mini R56 Cooper S 1598ccm 174HP 128KW Mini R56 John Cooper Works 1598ccm 211HP 155KW Mini R57 Cooper S 1598ccm 174HP 128KW Mini R57 John Cooper Works 1598ccm 211HP 155KW Mini Clubman R55 Cooper S 1598ccm 174HP 128KW Mini Clubman R55 John Cooper Works 1598ccm 192HP 141KW Mini Clubman R55 John Cooper Works 1598ccm 211HP 155KW This valve is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all. This doesn't always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem. The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based , with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years.

The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included. Recirc Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards.

Blow Off Adaptor Plate For 2007/8 Cooper S Turbo only. Blow Off Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards.

In The Box: 1 x FMDVR56A Valve 1 x Mini Wiring Harness 1 x Solenoid, Bracket, and Screws 1 x Mini Vacuum Tap 1 x Uprated Blue Spring 10 x Cable Ties 1 x 2000mm of 4mm Vacuum Tube 3 x M6 x 35 Socket Cap Bolts 1 x M5 x 35 Self Tapper Screw 1 x Instructions 1 x Forge Keyring and Sticker. This product is available in machined alloy finish only. Please advise choice when purchasing.
Forge Motorsport was founded in 1996 with the simple ideals of innovation, clever design, and manufacturing to the highest quality. Our mantra is the BEST customer care and after service worldwide. In doing this, we have developed the largest range of replacement aftermarket valves, intercoolers, and actuators in the world.

Utilising a state of the art in house CNC machine shop, and a highly skilled team of dedicated engineers and fabricators, we supply Forge branded product worldwide, to our sister companies Forge USA in Orlando, and Forge Asia in Taichung Taiwan. Proudly stating'Made In Great Britain' on all our products. With all this knowledge at our disposal, we are honoured to supply the leading names and race teams in the world of Motorsport including: F1, WRC, Rally X, and Le Mans.

We also supply several OEM manufacturers. We offer a lifetime customer service on all our products with a no hassle service promise. You can be sure these products are..

GET THE CORRECT PART FIRST TIME. PLEASE MAKE SURE YOU CHECK THE NOTES SECTION TO THE LEFT OF COMPATIBILITY TABLE. IF IN ANY DOUBT PLEASE ADVISE A REG NO OR ASK SO YOU GET THE CORRECT PART FIRST TIME. Please contact Customer Services if you have any questions.

We pride ourselves on a quality service and we are happy to address any concerns. The item "FMDVR56A FORGE MOTORSPORT FIT R56/57 BLOW OFF VALVE N14 ENGINES" is in sale since Wednesday, March 22, 2017. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Racing Equipment & Accessories". The seller is "mjd128" and is located in Leatherhead. This item can be shipped worldwide.

  • Manufacturer Part Number: FMDVR56A_1
  • Brand: Forge Motorsport



Fmdvr56a Forge Motorsport Fit R56/57 Blow Off Valve N14 Engines

   Fmdvr56a Forge Motorsport Fit R56/57 Blow Off Valve N14 Engines